Ck (BK/XK/LK) Gkl 10-35kv 200-3000A 500-2000kvar High Voltage Dry Air Core Reactor Series Parallel Reactor Current Limiting Filter Reactor

• Certification: ISO9001, CCC
• Protection: Corrosion Resistance
• Installation: Vertical
• Housing: UPR
• Rated Working Voltage: AC 6kv 10kv 35kv
• Type of Reactance Rate: 4% 6% 8% 10% 12%
• Model NO.: CK(BK/XK/LK)GKL
• Rated Insulation Level: AC35 Li75
• Product Implementation Standard: GB1094.6-2011 Jb/T 5346-2013
• Rated Current: 200-4000A
• Transport Package: Wooden Case
• Trademark: CNKC
• Origin: China
• Production Capacity: 500/Monthly

Product Description

Product Description
The current limiting reactor is connected in series with the power system to limit the short-circuit current when the  power system fails. When the line is short-circuited,  the current-limiting reactor uses its reactor characteristics to limit the short-circuit current of the line within a  certain limit,  so that the switchgear can remove the fault smoothly and effectively. Current-limiting reactors generally use air-core  reactors with better linearity of reactance value.
The current-limiting reactor can operate safely and reliably under  long-term rated current. In case of failure, its ampere-turns increase several times or dozens of times,  but its resistance or ability to limit short-circuit current cannot be reduced. Therefore,  the current limiting reactor should be made of hollow products instead of iron core products. The air-core reactor is an  inductive high-voltage electrical appliance used in the power system to limit short-circuit current,  reactive power compensation and equal shifting. The magnetic flux forms a loop through the air,  so it is called an air-core reactor. If the rated voltage and supply voltage of squirrel-cage AC three-phase  asynchronous motor are the same,  an air-core reactor with the same number of turns as the motor can be connected in series between the motor and the  incoming power supply to increase the inductance value and control the starting current not to be too high.
Hollow  reactors are mainly divided into hollow series reactors, hollow filter reactors, hollow shunt reactors, hollow current limiting reactors, hollow split reactors, hollow starting reactors, etc.,  which are often used for reactive power compensation, harmonic filtering, current limiting and other occasions.

Model Description

Technical parameters and structure dimensions
1. Rated working voltage: AC 6kV 10kV 35kV 
2. Type of reactance rate: 4% 6% 8% 10% 12% 
3. Rated insulation level:  AC35LI75 
4. The temperature rise of each part of the reactor:  the temperature rise of the coil is less than or equal to 75K 
5. Reactor noise:  less than 65dB (tested at 1 meter horizontal distance from the reactor) 
6. Overload capacity:  The reactor can run for a long time under the power frequency plus harmonic current not more than 1.2 times the rated current. 
7. Reactance value balance:  the difference between any two-phase reactance values of the three-phase reactor is not more than ±2%
8. Temperature  resistance and insulation grade:  the overall insulation level of the reactor is above grade F (155ºC) 
9. Operating environment:  use altitude ≤ 1500 meters, ambient temperature -25 ºC ~ + 45 ºC,  relative humidity ≤ 90% 11. Product implementation standard: GB10946-2011 JB/T 5346-2013
Product features and scope of use
Structural features: 
 1. Oil-free structure eliminates the shortcomings of oil-immersed reactors such as oil leakage and flammability,  and ensures safe operation. There is no iron core, there is no ferromagnetic saturation,  and the linearity of the inductance value is good;  
2. Applying the computer to optimize the design of the dry-type air-core reactor,  it can quickly and accurately design better structural parameters according to the different requirements of users;  
3. It adopts a cylindrical structure with multi-layer windings in parallel,  and there is a ventilation channel between each package, which has good heat dissipation and low hot spot temperature; 
 4. The windings are made of small cross-section round wires and multiple parallel windings,  which can significantly reduce the eddy current loss and leakage loss;  
5. The outside of the winding is tightly wrapped with glass fiber impregnated with epoxy resin,  and cured at high temperature, so that it has good integrity, high mechanical strength,  and strong ability to withstand short-term current impact;  
6. The use of aluminum star connection frame with high mechanical strength, the eddy current loss is small; 
 7. The entire inner and outer surfaces of the hollow reactor are coated with a special anti-ultraviolet anti-aging  protective layer, which has strong adhesion and can withstand harsh outdoor weather conditions; 
 8. The installation method can be three-phase vertical, and can also be character or in-line;  outdoor use can greatly reduce infrastructure investment;  
9. Safe operation, low noise, no need for frequent maintenance;  
10. According to user requirements, its inductance can be adjusted,  and the adjustment range can reach 5% or more. Applicable environment: 
1. The altitude does not exceed 2000m;  
2. Ambient temperature -25 ~ +45(ºC), relative humidity not exceeding 90%; 
3. The waveform of the power supply voltage is similar to a sine wave;  
4. There is no harmful gas around, no flammable and explosive materials;  
5. The surrounding environment should have good ventilation conditions. If it is installed in the cabinet,  ventilation equipment should be installed.

Product placement and installation
Reactor placement:  
1. The high-voltage hollow current-limiting reactor is connected in series with the output end of the secondary circuit  of the main transformer or generator. 
2. The placement methods of the series high-voltage hollow current-limiting  reactors are divided into:  three-phase laying, two stacking and one laying,  and three-phase stacking. 
3. The reactor wiring is not divided into incoming and outgoing lines,  any end can be an incoming line,  but the three-phase wiring must be consistent. 
4. The mounting feet of the reactor are also grounding points. Please  ensure reliable grounding during installation. Multiple feet cannot form a loop. 
5. The fastening screws of the feet  need to be fixed in place to avoid noise due to poor installation.
 6. The reactor is a magnetic component and should be  installed away from magnetically conductive materials, such as iron fences, iron columns, walls,  etc. Installation Precautions:  
1. The following installation methods do not consider the non-ferromagnetic space with closed turns and other reactors,  
2. There shall be no coarse metal objects within 1.1 D of the center of the reactor body, and no closed loop can be formed (Note:  D is the outer diameter of the reactor body). 
3. There should be no closed steel bars or metal objects in the reactor  installation foundation. 
4. The center distance between adjacent two groups (or two sets) of reactors is not less than  1.7 D.

Product Type Usage and Ordering Instructions
Common types and uses:
a. The series reactor is connected in series with the capacitor in the parallel capacitor compensation device to  suppress the harmonic current and limit the closing inrush current.
b. The current limiting reactor is connected in series with the power system to limit the short-circuit current and  limit the short-circuit current within the allowable range when the system fails.
c. The shunt reactor is connected in parallel with the power system,  and transmits inductive reactive power through the main conversion system to compensate the capacitive current of the  transmission line, prevent the voltage of the light-load line terminal from rising,  and maintain the voltage stability of the transmission system.
d. The filter reactor is used in series with the parallel capacitor bank to form a tuning loop to filter out specific  high-order harmonics and ensure the power supply quality of the power grid.
Ordering instructions:
1. System rated storage voltage
2. Rated current of reactor
3. Rated reactance rate
4. Rated capacity of reactor
5. Installation method (horizontal or stacked)
6. Use environment (indoor or outdoor)
7. The angle of the lunatic in and out of the line
8. Special requirements are clearly stated Note:  The above data are for reference only, and the specific parameters are subject to the factory products.

Product Details

Product real shot

A corner of the production work

Product packaging

Product apllication use