| Certification: | CCC |
|---|---|
| Color: | Orange |
| IP Rating: | IP50 |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier The composite dry-type bushing is a new type of wall bushing. Its inner insulation adopts a new type of insulating material, and the outer insulation (silicone rubber shed) uses high-temperature vulcanized silicone rubber, which has good anti-fouling performance. The seismic performance and explosion-proof performance are in line with the development trend of oil-free and miniaturization in the power sector. It is a new generation of high-voltage power transmission and transformation products that meet the transformation of urban and rural power grids.
FCGW composite wall bushing is outdoor-indoor type, suitable for power distribution devices of three-phase AC system power stations and substations with rated voltage of 10KV~35KV and frequency of 15~60Hz. The ambient temperature of the installation site is -40ºC~40ºC, and the altitude does not exceed 1000m. This product is suitable for horizontal installation.
The electrical and mechanical properties of the composite wall bushing meet the standard requirements, and also have the common characteristics of composite insulators. Small size, light weight, beautiful appearance, especially the silicone rubber shed used for external insulation, the good hydrophobicity and hydrophobic migration characteristics of the sheath make the composite wall bushing have good pollution resistance and prevent pollution flashover capability.
The composite wall bushing is composed of a cylindrical guide rod and an epoxy fiber layer that tightly wraps the guide rod, an intermediate flange, and a silicone rubber sheath and an umbrella skirt that encapsulate the epoxy glass fiber layer. The electric field is carried out in the intermediate flange area. Treat evenly. This series of products is produced according to Q/GND-JD05-2003, and complies with the relevant regulations of GB/T12944.1-1991, GB/T12944.2-1991 and J85892-1991
1. The ambient temperature is not higher than +40ºC, not lower than -40ºC
2. The altitude does not exceed 1000m;
3. The monthly average relative humidity is not more than 90%
4. The surrounding air should not be obviously polluted by corrosive or combustible gas, water vapor, etc.
5. No frequent violent vibration
Outdoor casing:
1. The ambient temperature is not higher than +40ºC, not lower than -40ºC
2. The altitude does not exceed 1000m;
3. The wind speed is not more than 34m/s
4. The air pollution degree of the product's use environment is divided into 4 grades according to GB/T5582: I, II, III, IV;
5. No frequent violent vibration
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}