Cksg 10-60kvar 11-77A Three-Phase Series Filter Reactor

• Customization: Available
• Certification: ISO9001, CCC
• Protection: Corrosion Resistance
• Model NO.: CKSG
• Installation: Vertical
• Housing: UPR
• Reactance Rate: 1%,6%,12%
• Capactior Capacity: 10 kvar
• Current: 12.83 a
• Dimension: 190*160*170
• Insulation Grade: H
• Transport Package: Wooden Case
• Trademark: CNKC
• Origin: China
• Production Capacity: 500/Monthly

Product Description

Product Description
C(L) KSG filter reactor is suitable for reactive power compensation and harmonic control system. The filter reactor is  connected with capacitor and generates the minimum impedance or maximum impedance by using the physical characteristics  of LC resonance. It can absorb or block the harmonic voltage and current of the corresponding frequency in the power  grid, so as to achieve the purpose of harmonic filtering, maintain the optimal value of system power factor,  and make the power quality of power grid It is obviously and effectively improved.

Model Description

Technical parameters and structure dimensions

Product features and scope of use
1. The reactor has three-phase and single phase type,  all of iron core dry type. 
2.The iron core made of high quality low loss cold rolled oriented silicone steel sheet,core  column consists of multiple gas gap,divided evenly into many small sections,gap isolated by use of epoxy resin layer  pressed glass cloth,this can ensure the gap have no change during in service. 3.Coil made of H class or C class  enamelled copper flat wire,laid closely and evenly,where it has perfect heat radiating performance,  
4.After the core and coil are integrated together,then pre-dry,immerse into painting in vacuum chamber heat dry for  solidification,H class paint used for immersion,this can solidly condense the coil and iron coil,which will reduce the  noise level in service and has high heatproof class. 
5.The fixing parts of core column adopted non-magnetic material,  to ensure its high quality and low temperature rise. 6.Exposed surface treat for corrosion resistant,  output sides utilize tinned copper pipe terminals Environmental conditions:  
1. Altitude for installing place should not exceed 1000m. 
2. Ambient temperature -25ºC~+45ºC,  Relative humidity is not exceed 90%. 
3. Environment exists without harmful gas, steam,  chemical deposition.
 4. The surrounding environment should be good ventilation conditions, such as in the cabinet,  should be equipped with ventilation equipment.

Product Deatils

Product realshot

A corner of the production workshop

Product packaging

Product application use